Your business and the value you are producing is also valuable for us. Now on, exterior of your factories will be beautified with Storrol Industrial Doors and gain value, helping you reflect the value you are producing.

In heavy-duty areas such as factory, warehouse, bonded warehouse etc., you can open and close your door quickly with a touch of button or other methods. At any time and in any condition, you can drive your door with the spring and manual system allowing you to continue your work even in case of a blackout.

Thanks to its specially designed motor and rail system, Storrol Industrial Doors offers you unlimited opportunity of use making your work easier, stepping up your pace and becoming a part of the solution.

Closing wide open spaces, Storrol Industrial Doors provides you extra security against thievery, your highest concern, thanks to reinforced galvanized steel sheet and polyurethane foam filled sturdy panels.

With the door-in-door application, system allows both large vehicles and your staff to pass through, while eliminating the need to open the larger door to allow human passage.

In the spaces where heating is needed for winter, cooling for the summer, the panels filled with polyurethane, which ensures heat isolation, protects the interior temperature of your space and provides a very high level of heat isolation.

» Consists of panels with special support sheet, filled with 41mm polyurethane sandwiched between two 0.5mm galvanize sheets. Total thickness is 42mm.
» Polyurethane foam has a density of 40kg/m3 and heat transmission coefficient of 0.5w/m².K.
» Air-tightness is ensured with a sponge sealing between panels.  
» Door panels are available in plain or cored, wooden looking PVC finish or paint-finish.
» Consists of Anti-finger jamming panels.
» Consists of corrugated wooden textured panels.
» No friction while opening or closing the panels.
» Wind resistance 95 kg/m2. For large doors, special Steel U-bars are used in order to enhance the wind resistance.
» Weight of Panels; 500 mm panel: 11.7 kg/m², 610 mm panel: 11,1 kg/m²'dir.

» Has CE, ISO 9001 and Turkish Standards certifications.  
» Operating voltage, two types as Monophase 220V or Triphase 380V
» Motor powers; monophase motor: 0,75HP, triphase motor: 1 HP.
» Motor rating is 20 - 25 cm/sec.
» Motor running frequency is in the range of 20 rev/h to 35 rev/h.
» Motor load-carrying capacity is in the range of 27 m² to 35 m² panel
» Motors are thermally-protected against stress-induced heating.
» Control unit has three-buttons and is electronically operated by a microchip.
» Suitable for operation with a remote control.

» Doors can also be operated motorless with a manual-operation device.
» Motor doors come standard with manual operation for use in case of a blackout.
» For manual operation, rope or chain is optionally available.
» In order to minimize friction, polyamide wheels rotate and pass through 50mmx2mm steel side rails.

» Door automatically stops and ascends if it contacts with any object during closing process thanks to its pneumatic system.
» Rubber seal is used that is suitable to the pneumatic safety system.
» A safety photocell can be installed, which prevents door from closing if an object is detected in the door clearance.

» In case of a rope breakage, this system intervenes in to prevent the fall of the door.
» In case of a spring breakage, this system intervenes in to prevent the fall of the door.
» It is possible to install warning and safety systems such as photocell, flasher, pneumatic safety system.

» Designed for the spaces requiring light.
» Two types of glass as square and oval is applicable.
» Thanks to this window, it is easy to carry out exit-entrance controls.
» Available in single or double wall.
» It is possible to apply acrylic glass windows, single or double wall, in desired orders on the door panels for lighting purposes.

» It is preferred especially when there is no external door during winter.
» It is possible to make door-in-door (staff door-in-service door) application.
» Staff door is foldable simultaneously while the industrial door folds.
» Manuel locking mechanism has the locking feature.
» Installed at the center of the door.
» Door automatic closing system ensures that the door is closed all the time.
» Staff Door must be equipped with a doorsill.
» The buildings which require staff access, staff door can be manufactured on the moving door panels.
» Staff door and industrial door move together.

» Standard panel color is RAL 9002 white.
» RAL 9002, RAL 9006, RAL 5010, RAL 3001, RAL 1021 and RAL 6005 color options are available.
» Also other RAL colors available upon request.

» 5 types of bearing are available.
  1. Standard Bearing 2. High Bearing 3. Low Bearing
  4. Slope Ceiling Bearing 5. Guillotine Bearing
» Our expert team is available to suggest you the best bearing option that suits your project.
» Standard bearing beam clearance is 42cm.

» For the buildings, which aesthetic and light concerns are important, transparent sectional doors made up of acrylic glass and aluminum bearing profiles are manufactured.
» Exclusively designed aluminum profiles are used.
» Transparency is ensured thanks to the acrylic glasses attached to said profiles.
» They are especially preferred for the car maintenance services.
» Aluminum profiles is painted in the desired RAL color.
» Operation principles are same as the steel polyurethane filled panels.

» Torsion rails are made of steel.
» They maintain lesser load imposed upon the Motor during opening-closing cycle, prolonging the motor life.
» In the blackouts, motor is deactivated with a deactivator enabling an easy activation.

» Foam seal is used for the sealing system between panels.
» Rubber seal is used for the sealing system between panel and ground.
» Double-walled rubber external seal is use for the sealing between panel-wall.

» Any kind of access control system can be used (remote control, key control, password control, keypad, magnetic metal mass detector, IP switch, radar, etc.)